The component "ZCAT1325-0530A-BK" from TDK Corporation is a hinged ferrite core used for EMI suppression. Here is a breakdown of its specifications:
- Manufacturer: TDK Corporation
- Part Number: ZCAT1325-0530A-BK
- Type: Ferrite Core
- Impedance: 100 Ohms at 100 MHz
- Hinged: The term "hinged" suggests that this ferrite core can be opened and closed around a cable or wire, making it suitable for applications where the core can be easily snapped closed around existing cables for EMI suppression.
-
DataSheet ZCAT1325-0530A-BK PDF
More Details:
- Outer Diameter: 5mm
- Part Length: 13.2mm
- Part Width: 13.2mm
- Part Height: 5mm
- Material: Ferrite
- Color: Black (BK)
- Impedance: Ferrite cores like this are commonly used to suppress high-frequency noise in electronic circuits by providing a path for unwanted high-frequency signals to be absorbed or reflected.
Applications:
- EMI Suppression: These ferrite cores are commonly used to reduce electromagnetic interference (EMI) or radio frequency interference (RFI) in electronic circuits or cables.
- Noise Suppression: By installing these cores around cables, they can effectively reduce the amount of electromagnetic noise generated or received by the cables.
- Filtering: Ferrite cores can act as inductive filters, attenuating high-frequency noise signals while allowing desired signals to pass through.
Usage:
To use this ferrite core effectively:
- Installation: Open the hinged ferrite core and snap it around the cable you want to suppress EMI on, ensuring a good fit.
- Placement: For best results, place the ferrite core close to the source of the noise or near the equipment that needs protection against interference.
- Multiple Cores: You can use multiple ferrite cores on different cables or multiple loops around the same cable for increased suppression.
Ensure you refer to the manufacturer's datasheet or application notes for specific guidance on using this ferrite core in your application for optimal EMI suppression.
